ENGLEHARD CORP -- GENERAL PURPOSE LIQUID SOLDERING FLUX  -- 3439-00N040196
<pre>=====================  Product Identification  =====================

Product ID:GENERAL PURPOSE LIQUID SOLDERING FLUX
MSDS Date:02/12/1991
FSC:3439
NIIN:00N040196
MSDS Number: BSDVZ
=== Responsible Party ===
Company Name:ENGLEHARD CORP
Address:RT 152
City:PLAINVILLE
State:MA
ZIP:02762
Country:US
Info Phone Num:508-695-7811
Emergency Phone Num:508-695-7811
CAGE:HO905
=== Contractor Identification ===
Company Name:ENGELHARD CORP
Address:235 KILVERT ST
Box:City:WARWICK
State:RI
ZIP:02886
Country:US
Phone:401-739-9550
CAGE:86337
Company Name:ENGLEHARD CORP
Address:ROUTE 152
Box:City:PLAINVILLE
State:MA
ZIP:02762
Country:US
Phone:508-695-7811
CAGE:HO905

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC CHLORIDE (LIMITS GIVEN AS ZINC CHLORIDE FUME)
CAS:7646-85-7
RTECS #:ZH1400000
Fraction by Wt: 60-70%
OSHA PEL:1 MG/M3;2 MG/M3 STEL
ACGIH TLV:1 MG/M3;2 MG/M3 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:AMMONIUM CHLORIDE (LIMITS GIVEN FOR AMMONIUM CHLORIDE FUME)
CAS:12125-02-9
RTECS #:BP4550000
Fraction by Wt: 5-10%
OSHA PEL:10MG/M3;20MG/M3 STEL
ACGIH TLV:10MG/M3;20MG/M3 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHANOL, 2-AMINO-; (ETHANOLAMINE)
CAS:141-43-5
RTECS #:KJ5775000
Fraction by Wt: 3-7%
OSHA PEL:3 PPM; 6 PPM STEL
ACGIH TLV:3 PPM; 6 PPM STEL

Ingred Name:HYDROCHLORIC ACID; (HYDROGEN CHLORIDE). (MFR CAS#
    7789-29-9)
CAS:7647-01-0
RTECS #:MW4025000
Fraction by Wt: 3-7%
OSHA PEL:5 PPM, C
ACGIH TLV:5 PPM, C
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:GLYCEROL; (GLYCERINE)
CAS:56-81-5
RTECS #:MA8050000
Fraction by Wt: 1-5%
OSHA PEL:10 MG/M3 TDUST;5RESP
ACGIH TLV:10 MG/M3 (MIST)

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 15-40%

Ingred Name:SUPP DATA: IMMED MED ATTN IMMED.
RTECS #:9999999ZZ

Ingred Name:SPILL PROC: RESPONSE INFO. IT IS RECOM THAT EACH USER
    ESTABLISH A SPILL PREVENTION, CTL & COUNTERMEASURE PLAN (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8:(SPCC). SUCH PLAN SHOULD INCL PROC APPLIC TO PROPER
    STOR, CTL & CLEAN-UP OF SPILLS, INCL REUSE/DISP AS APPROP.
RTECS #:9999999ZZ

Ingred Name:WASTE DISP METH: DISP REQUIREMENTS ARE DEPENDENT ON HAZ
    CLASSIICATION & WILL VARY BY LOCATION & TYPE OF DISP (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10:SELECTED. SOME WASTE MATERIALS ARE AMENABLE TO
    RECYCLE/REUSE.
RTECS #:9999999ZZ

Ingred Name:RESP PROT: QUALIFICATIONS FOR RESP USE) & GOOD INDUSTRIAL
    HYGIENE PRACTICE.
RTECS #:9999999ZZ

Ingred Name:VENT: OUT OF FUMES. SEE ANSI/ASC Z49.1-88 (SFTY IN WELD &
    CUTTING) & INDUST VENT MANUAL (PUBLISHED BY AMERICAN (ING 14)
RTECS #:9999999ZZ

Ingred Name:ING 13:AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL
    HYGIENISTS) FOR MORE INFO ON VENTILATION DESIGN.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: CONT CAUSES BURNS
    W/EXTREME PAIN, SWELL, INFLAMM FOLLOWED BY CORNEAL ULCERATION.
    SKIN: CONT MAY CAUSE BURNS & CHEM DERM. ZINC CHLORIDE MAY PRDCE
    SENSIT IN FORM OF ECZEMATOID DERM. INHAL: M AY CAUSE MOD TO SEV
    RESP IRRIT W/SYMPS THAT INCL NASAL DISCHARGE & NOSEBLEEDS, COUGH,
    SORE THROAT & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: LABORED BRTHG. SEV EXPOS MAY CAUSE
    BRONCHOSPASM & PULM EDEMA. INGEST: MAY CAUSE SEV CORR EFTS IN
    ESOPHAGUS & STOM, OFTEN COMPLICATED BY PYLORIC STENOSIS. CHRONIC:
    PROLONGED OVEREXPOSURE MAY	CAUSE RESPIRATORY IRRITATION & SKIN
    SENSITIZATION DERMATITIS.
Medical Cond Aggravated by Exposure:PERSONS W/IMPAIRED RESP FUNC OR
    PRE-EXISTING RESP &/OR SKIN DISEASES MAY BE AT INCREASED RISK FROM
    EXPOSURE TO THIS MATERIAL.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH IMMED W/COPIOUS AMTS OF WATER, LIFTG LIDS UNTIL NO
    EVIDENCE OF CHEM REMAINS(@ LST 20 MIN). GET IMMED MED ATTN.
    SKIN:IMMED REMOVE CONTAMD CLTHG & SHOES. FLUSH AFFECTED AREA
    W/WATER FOR @ LST  15 MIN, PAYING PARTICULAR ATTN TO SKIN UNDER
    NAILS. GET MED ATTN IF IRRIT PERSISTS. LAUNDER CONTAMD CLTHG BEFORE
    REUSE. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF
    BRTHG IS (SUPP DATA)

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MATL IS NOT COMBUST & IS NOT INCOMPAT W/ANY EXTING
    MEDIA. USE ANY MEDIA APPROP FOR SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . COOL FIRE EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:NOT A FIRE/EXPLOSION HAZARD. HOWEVER,
    CORROSIVE HYDROGEN FLUORIDE MAY BE RELEASD IN A FIRE SITUATION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CNTN SPILLAGE. WEAR APPROP PROT CLTHG & EQUIP.
    COVER SPILL W/ABSORB MATL & COLLECT. WASH RESIDUAL TRACES W/SOAP &
    WATER. NOTIFICATION OF NATL RESPONSE CTR (800-424-8802) MAY BE
    REQD. REFER TO EPA, DOT  & APPLIC ST & LOC REGS FOR CURRENT (ING 8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTR CLSD. STORE IN A COOL, DRY
    LOCATION. DO NOT BREATHE FUMES FROM BRAZ/SOLDER. DO NOT FLUX IN
    EYES, ON SKIN/CLTHG. USE ONLY W/ADEQ VENT.
Other Precautions:EXPOS TO METAL FUMES FROM SOLDERS MAY POSE ADDNL HAZ.
    REFER TO ALLOY MSDS FOR ADDNL PREC. REFER TO ANSI/ASC Z49.1-SS
    (SFTY IN WELD & CUT) PUBLISHED BY AMERICAN WELDING SOCIETY FOR
    FURTHER INFO SELECTI ON OF PERSONAL PROTECTIVE EQUIPMENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF NEEDED A NIOSH/MSHA APPRVD RESP W/HIGH
    EFFICIENCY PARTICULATE/ACID GAS FILTERS MAY BE USED. FOR HIGHER
    EXPOS (>10XPEL) A NIOSH/MSHA APPRVD SUPPLIED AIR RESP MAY BE REQD.
    RESP SELECTION I/A/W OSHA 1 910.134, ANSI Z88.6 (PHYS (ING 12)
Ventilation:LOC EXHAUST VENT AS REQD TO MAINTAIN CONC OF AIR CONTAM
    BELOW APPLIC EXPOS LIM. TRAIN WORKER TO KEEP HIS HEAD (ING 13)
Protective Gloves:RUBBER, NEOPRENE/NITRILE.
Eye Protection:ANSI APRV CHEM WORK GOG/FL LGTH FCSHLD.
Other Protective Equipment:RUBBER APRON OR OTHER PROTECTION AS NEEDED
    TO PREVENT SKIN AND CLOTHING CONTACT.
Work Hygienic Practices:WASH THORO W/SOAP & WATER AFTER USE/HNDLG. DO
    NOT EAT, DRINK/SMOKE IN WORK AREA.
Supplemental Safety and Health
FIRST AID PROC: DFCLT ADMINISTER OXYGEN IF AVAIL. OXYGEN SHOULD BE
    ADMINISTERED BY QUALIFIED MED PERS ONLY. KEEP WARM & @ REST. GET
    MED ATTN IMMED. INGEST: DO NOT INDUCE VOMIT. IF CONSCIOUS GIVE LG
    AM TS OF WATER. GIVE MILK/EGG WHITES IF AVAIL. NEVER GIVE ANYTHING
    BY MOUTH TO AN UNCON PERSON/HAVING CONVULS. GET (ING 7)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:215F,102C
Vapor Pres:5.24
Vapor Density:0.54
Spec Gravity:1.387(H*2O=1)
Evaporation Rate &amp; Reference:<1(BUTYL ACETATE=1)
Solubility in Water:100%
Appearance and Odor:CLEAR, PALE YELLOW COLOR WITH NO CHARACTERISTIC
    ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:EMITS ZINC OXIDE & CORR FUMES OF ZINC
    CHLORIDE, HYDROGEN CHLORIDE & AMMONIA WHEN HEATED TO DECOMPOSITION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PROD, IF DISPOSED OF BY ITSELF, IS A HAZ WASTE
    UNDER EPA HAZ WASTE REGS BECAUSE OF CORROSIVITY. WASTE MIXT CNTNG
    PROD SHOULD BE TESTED AS APPROP TO DETERM WASTE CLASSIFICATION.
    FED, ST & LOC DISP LAWS  & REGS WILL DETERM PROPR WASTE DISP
    PROC.(ING 10)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.